Motor protection switch MS116
MANUAL MOTOR STARTER MS116-10.0
ABB
With registration you can access the Würth Elektro online shop selection.
Motor protection switches are electromechanical main circuit safety devices. They are mainly used as manual motor power switches (ON/OFF) and for nonfused protection against short-circuiting, overloading and phase failures.
Datasheets(X)
Overload release current setting | 6.3-10 A |
Adjustment range undelayed short-circuit release | 150-150 A |
With thermal overload protection | Yes |
Phase failure sensitive | Yes |
Switch off technique | Thermomagnetic |
Rated operating voltage | 690-690 V |
Rated operation power at AC-3, 400 V | 4 kW |
Type of electrical connection of main circuit | Screw connection |
Type of control element | Turn button |
Device construction | Complete device in housing |
With integrated auxiliary switch | No |
With integrated under voltage release | No |
Number of poles | 3 |
Rated short-circuit breaking capacity lcu at 400 V, AC | 50 kA |
Degree of protection (IP) | IP20 |
Height | 90 mm |
Width | 45 mm |
Depth | 85.6 mm |
E-number Finland | 3706010 |
Brand | ABB |
Last viewed
Circuit breaker
LED profile Premium FT
EMC LOCKNUT MS PG EMC, brass nickel plated
Contactor AF16
Enclosed industrial luminaire Damp Proof Classic, IP65
Motor protection circuit breaker MPX3 32S
Flush-mounted utility outlet corner, IP67
Cable tie anchor CTM-set, Hellermann PA, screw fastening, Black
Circuit breaker
Axle OX