Motor protection switch MS116
MANUAL MOTOR STARTER MS116-16.0
ABB
With registration you can access the Würth Elektro online shop selection.
Motor protection switches are electromechanical main circuit safety devices. They are mainly used as manual motor power switches (ON/OFF) and for nonfused protection against short-circuiting, overloading and phase failures.
Datasheets(X)
Overload release current setting | 10-16 A |
Adjustment range undelayed short-circuit release | 240-240 A |
With thermal overload protection | Yes |
Phase failure sensitive | Yes |
Switch off technique | Thermomagnetic |
Rated operating voltage | 690-690 V |
Rated operation power at AC-3, 400 V | 7.5 kW |
Type of electrical connection of main circuit | Screw connection |
Type of control element | Turn button |
Device construction | Complete device in housing |
With integrated auxiliary switch | No |
With integrated under voltage release | No |
Number of poles | 3 |
Rated short-circuit breaking capacity lcu at 400 V, AC | 16 kA |
Degree of protection (IP) | IP20 |
Height | 90 mm |
Width | 45 mm |
Depth | 85.6 mm |
Last viewed
Surface mounting frame downlight Downlight Slim DN
Box cover AK1.1
Flush-mounted outlet with cover plate IP21 Exxact
Flush-mounted outlet diagonal IP21 Exxact
Pipe end cap plastic
Stand Esteri
Coupling nut, zinc-plated steel
Circuit board support TRMDLSP1
Drain stub AS12.4
Power cable CU MCMK Prysmian