Motor protection switch MS116
MANUAL MOTOR STARTER MS116-20
ABB
With registration you can access the Würth Elektro online shop selection.
Motor protection switches are electromechanical main circuit safety devices. They are mainly used as manual motor power switches (ON/OFF) and for nonfused protection against short-circuiting, overloading and phase failures.
Datasheets(X)
Overload release current setting | 16-20 A |
Adjustment range undelayed short-circuit release | 300-300 A |
With thermal overload protection | Yes |
Phase failure sensitive | Yes |
Switch off technique | Thermomagnetic |
Rated operating voltage | 690-690 V |
Rated operation power at AC-3, 400 V | 7.5 kW |
Type of electrical connection of main circuit | Screw connection |
Type of control element | Turn button |
Device construction | Complete device in housing |
With integrated auxiliary switch | No |
With integrated under voltage release | No |
Number of poles | 3 |
Rated short-circuit breaking capacity lcu at 400 V, AC | 16 kA |
Degree of protection (IP) | IP20 |
Height | 97.8 mm |
Width | 45 mm |
Depth | 85.4 mm |
Last viewed
Surface-mounted luminaire IP65 Surface Bulk Head with EM motion detector
Hexagon screw, full thread
Cable protector Instal
Set screw, hex socket, cup point
Hexagon socket screw, cylinder head
Circuit breaker
Office luminaire Linear IndiviLED Direct
Middle bracket RMK zinc plated, Meka
Circuit board support TRDLMSP
Group switchgear Data Näpsä Smart