Motor protection switch MS116
MANUAL MOTOR STARTER MS116-25
ABB
With registration you can access the Würth Elektro online shop selection.
Motor protection switches are electromechanical main circuit safety devices. They are mainly used as manual motor power switches (ON/OFF) and for nonfused protection against short-circuiting, overloading and phase failures.
Datasheets(X)
Overload release current setting | 20-25 A |
Adjustment range undelayed short-circuit release | 375-375 A |
With thermal overload protection | Yes |
Phase failure sensitive | Yes |
Switch off technique | Thermomagnetic |
Rated operating voltage | 690-690 V |
Rated operation power at AC-3, 400 V | 11 kW |
Type of electrical connection of main circuit | Screw connection |
Type of control element | Turn button |
Device construction | Complete device in housing |
With integrated auxiliary switch | No |
With integrated under voltage release | No |
Number of poles | 3 |
Rated short-circuit breaking capacity lcu at 400 V, AC | 16 kA |
Degree of protection (IP) | IP20 |
Height | 97.8 mm |
Width | 45 mm |
Depth | 85.4 mm |
E-number Finland | 3705874 |
Brand | ABB |
Last viewed
Closet IP66, Fe Spacial S3D
Ceiling bracket QCB, Unipro
Circuit breaker
Wall bracket VKZ acid-resisting steel, Meka
Installation conductor H07V2-K Twin cable
Lighting rail middle connection unit CMCU3, Unipro
Corner component Instal
Saddle terminal KN Ensto
Terminal block ZS16 SNK series
Lighting rail adapter A100, Unipro