Motor protection switch MS132
MANUAL MOTOR STARTER MS132-0.63
ABB
With registration you can access the Würth Elektro online shop selection.
Motor protection switches are electromechanical main circuit safety devices. They are mainly used as manual motor power switches (ON/OFF) and for nonfused protection against short-circuiting, overloading and phase failures. Nonfused protection is a cost-effective choice and does not take up a lot of room. It also ensures quick response in case of short-circuiting by switching the motor off in a few milliseconds. Starter combinations are usually configured along with the contactors.
Datasheets(X)
Overload release current setting | 0.4-0.63 A |
Adjustment range undelayed short-circuit release | 7.9-7.9 A |
With thermal overload protection | Yes |
Phase failure sensitive | Yes |
Switch off technique | Thermomagnetic |
Rated operating voltage | 250-690 V |
Rated permanent current Iu | 0.63 A |
Rated operation power at AC-3, 400 V | 0.18 kW |
Type of electrical connection of main circuit | Screw connection |
Type of control element | Turn button |
Device construction | Complete device in housing |
With integrated auxiliary switch | No |
With integrated under voltage release | No |
Number of poles | 3 |
Rated short-circuit breaking capacity lcu at 400 V, AC | 100 kA |
Degree of protection (IP) | IP20 |
Height | 90 mm |
Width | 45 mm |
Depth | 86.75 mm |
Last viewed
Hexagon screw, full thread
Modular luminaire Panel PFM 600 PS
Break auxiliary contact OA3G01
EMC LOCKNUT MS PG EMC, brass nickel plated
Charging station load management control unit EVlink Home Peak Controller 1-phase
Defrosting cable Ebeco Frostvakt 10
Spacer screw SIUL MSNI
Remote control BLE-IR-Adapter Luxomat
Hexagon socket screw, cylinder head
Flush button, releasable Compact