Miniature circuit breaker MCN 6kA Hager
MCB 1-POLE C 25A MCN125E HAG
UTU
With registration you can access the Würth Elektro online shop selection.
The circuit breaker is equipped with a delayed thermal release for overload protection and an electromagnetic release for short-circuit protection. Can be equipped with auxiliary modules that can be retrofitted. The device is equipped with a marker label and it can be replaced from the rail by releasing the DIN rail bracket to the extreme position.
Datasheets(X)
Built-in depth | 70 mm |
Release characteristic | C |
Number of poles (total) | 1 |
Number of protected poles | 1 |
Rated current | 25 A |
Rated voltage | 415 V |
Rated insulation voltage Ui | 500 V |
Rated impulse withstand voltage Uimp | 4 kV |
Rated short-circuit breaking capacity Icn according to EN 60898 at 230 V | 6 kA |
Voltage type | AC |
Rated short-circuit breaking capacity Icn according to EN 60898 at 400 V | 6 kA |
Frequency | 50-60 Hz |
Current limiting class | 3 |
Flush-mounted installation | Yes |
Concurrently switching neutral conductor | No |
Over voltage category | 3 |
Pollution degree | 2 |
Additional equipment possible | Yes |
Width in number of modular spacings | 1 |
Degree of protection (IP) | IP2X |
Ambient temperature during operating | -25-70 °C |
Connectable conductor cross section multi-wired | 1-25 mm² |
Connectable conductor cross section solid-core | 1-35 mm² |
Explosion-proof | No |
E-number Finland | 3246525 |
Brand | UTU |
Last viewed
Wall bracket VK3 hot dip galvanised, Meka
Welding cable H01N2-D
High-bay luminaire IP65 High Bay Gen 3 DALI
CONDUCTOR TAG STRIP 1.5–2.5 MM2
Adhesive pad
Residual current circuit breaker with overcurrent DS202 30mA
Time delay block TeSys
Hexagon socket screw, flat round head
Hexagon socket screw, flat cylinder head
Heat shrink hose with adhesive: FRG8003