MOD. TRUSS HEAD PIAS 4,2X13 ZP
Art.-no. 02184 13
EAN 4056807002057
With registration you can access the Würth Elektro online shop selection.
Drilling, threading, and screwing - all in one working phase
Noticeably less time and effort required
Precise bore diameter in each screw connection
- Minimal thread tolerance
- Always an optimum fixing
Prevents errors in installation
- The crimped flange reduces surface pressure, preventing tension splitting
- Contact pressure during use is approx. 100 N; if necessary, a depth regulator can be used during screwing
Zinc-plated drilling screws may only be used in places where no moisture is expected. For building control authority approved fastening elements, the approval and particularly part 2, Special Conditions, must be followed.
Can be stored in the ORSY® system
Datasheets(X)
 | |
Material | Steel |
Surface | Zinc plated |
Nominal diameter (d) | 4.2 mm |
Length (l) | 13 mm |
Head diameter (d) | 11.0 mm |
Head height (k) | 2.6 mm |
Drill tip length (l) | 3.7 mm |
Other standard | Company standard |
Head type | Pan head |
Internal drive | H2 |
Thread type | Self-tapping screw thread |
Min. recommended substructure thickness | 1.5 mm |
Max. material thickness to be drilled through (metal) | 3.5 mm |
Max. attachment thickness (l) | 6 mm |
Min./max. recommended installation speed (idling) | 1700-2500 rpm |
RoHS-compliant | Yes |
Notice |
|
Last viewed
Defrosting cable Frostvakt 25
Slotted screw cylinder head DIN 84
Deep beam lamp HQL LED HIGHBAY
Installation conductor H07V2-K MKEM 90
Spring lock washer DIN 127-B ST
Circuit breaker
Installation conduit TAM 16HF ICTA
EMC LOCKNUT MS PG EMC, brass nickel plated
Downlight Slim SQ, IP20
Spacer screw SIUL ZN