MOD. TRUSS HEAD PIAS 4,2X38 ZP
Art.-no. 02184 38
EAN 4053479907659
With registration you can access the Würth Elektro online shop selection.
Drilling, threading, and screwing - all in one working phase
Noticeably less time and effort required
Precise bore diameter in each screw connection
- Minimal thread tolerance
- Always an optimum fixing
Prevents errors in installation
- The crimped flange reduces surface pressure, preventing tension splitting
- Contact pressure during use is approx. 100 N; if necessary, a depth regulator can be used during screwing
Zinc-plated drilling screws may only be used in places where no moisture is expected. For building control authority approved fastening elements, the approval and particularly part 2, Special Conditions, must be followed.
Can be stored in the ORSY® system
Datasheets(X)
 | |
Material | Steel |
Surface | Zinc plated |
Nominal diameter (d) | 4.2 mm |
Length (l) | 38 mm |
Head height (k) | 2.6 mm |
Drill tip length (l) | 3 mm |
Head type | Pan head |
Internal drive | H2 |
Thread type | Self-tapping screw thread |
Min./max. material thickness | 1.75-3.0 mm |
RoHS-compliant | Yes |
Notice |
|
Last viewed
EMC LOCKNUT MS PG EMC, brass nickel plated
Drywall box HW set 050
Cable routing conduit FT 40 aluminium, Instal
Lighting rail T33, Unipro
Floodlight Floodlight PFM Flex asymmetric
Suspension kit Panel PFM 600
Sound-proofing component Instal
Enclosed industrial luminaire Damp Proof Classic, IP65
Slotted screw cylinder head DIN 84
Plastic rivet black TRRT