Motion detector 160 ELKO RS16
MOTION DETEC. 160 IP20 USE WT ELKO RS16
SCHNEIDER ELECTRIC
With registration you can access the Würth Elektro online shop selection.
10A motion detector with a push-button that detects motion with up to 160 degree area and a distance of up to 8 meters. The device has a built-in adjustable twilight switch (5-500 lux), which can be used to activate motion detection, for example, only at dusk. The button timer is adjustable from 1 second to 30 minutes (default 5 minutes), allowing the lights to be manually turned on and off. Short-circuit and overload protection with automatic reset and the soft start function that protects the luminaires ensure safe and reliable operation.
The device has screw terminals and requires a neutral wire, and it is recommended to be installed at a height of 1 meter. Surface mounting into a 35mm box. Suitable for use in dry spaces (IP20), and the device has no minimum load requirement. Additionally, the device can be set to slave or test mode. Delivery includes a cover plate.
Datasheets(X)
Model | Movement sensor |
Sensor type | Passive infrared |
With DALI interface | No |
Constant light control | No |
HVAC-control | No |
Forced switch on | Yes |
Forced switch off | Yes |
Animal zone | No |
Creep-under protection | No |
Networkable | No |
Scan angle | 160 ° |
Optimum mounting height | 1 m |
Staircase light controller | Yes |
Bridging switch | No |
Max. reach sideways | 6 m |
Max. presence range | 86 m² |
Max. reach frontally | 8 m |
Suitable for wireless transmission | No |
Remote operation | No |
With remote control | No |
Response value sensitivity adjustable | No |
Response value luminosity adjustable | Yes |
With signal unit | No |
Teach-function for response value luminosity | No |
Suitable for ceiling mounting | No |
Suitable for wall mounting | Yes |
Dim function with dimmer basic element | No |
Connection type | Screwed terminal |
Material | Plastic |
Material quality | Thermoplastic |
Halogen free | No |
Surface protection | Untreated |
Surface finishing | Glossy |
Anti-bacterial treatment | No |
Colour | White |
Transparent | No |
Degree of protection (IP) | IP21 |
Voltage type | AC |
Frequency | 50-50 Hz |
Nominal voltage | 230 V |
Min. switch-on time | 1 s |
Max. duty cycle | 30 min |
Switch-off delay | 1800 s |
Switching-on delay | 0 s |
Detection angle horizontal | 160-160 ° |
Pivoting range sensor, horizontal | 0-0 ° |
Pivoting range sensor, vertical | 0-0 ° |
Response value luminosity | 5-500 lx |
Max. switching power | 2200 W |
Suitable for C-load | Yes |
Temperature | 5-35 °C |
Number of switching zones | 13 |
Substation input | Yes |
With alarm function | No |
Width | 84 mm |
Height | 84 mm |
Depth | 44 mm |
Built-in width | 55 mm |
Built-in depth | 27 mm |
Built-in length | 55 mm |
Built-in diameter | 55 mm |
Min. depth of built-in installation box | 46 mm |
E-number Finland | 2610078 |
Brand | SCHNEIDER ELECTRIC |
Last viewed
Spotlight Optic Track XXS
Charging station cover GARO Entity Pro
Energy transfer chain cable EMC PUR-C, Halogen-free
Motion detector PIRA T
Installation cover Näpsä
LED power source 24V IP20 standard FTLight
LED lamp CLASSIC A LED PERFORMANCE DIM matte
Slotted nut
EMC LOCKNUT MS PG EMC, brass nickel plated
Hexagon screw, full thread