Netatmo motion detector
MOTION SENSOT IP44 NETATMO VA
LEGRAND
With registration you can access the Würth Elektro online shop selection.
Wireless motion detector for controlling one or more wire switches, outlets, or micro modules.
• For indoor and outdoor use (IP44).
• Detection range 8 m and 140 degrees.
• Recommended installation height 2.5 m and detector clearance 6 m.
• Run time adjustable between 15 s – 15 min and sensitivity 5–1,000 lux.
• ON/OFF switch.
Delivery includes 2x1.5 V AA batteries
Datasheets(X)
Bus system KNX | No |
Bus system KNX-RF (Radio Frequent) | No |
Bus system radio frequent | No |
Bus system LON | No |
Bus system Powernet | No |
Other bus systems | None |
Radio frequent bidirectional | Yes |
Model | Movement sensor |
Mounting method | Surface mounted |
Material | Plastic |
Material quality | Thermoplastic |
Surface protection | Untreated |
Surface finishing | Glossy |
Colour | White |
RAL-number (similar) | 9003 |
Transparent | No |
With bus connection | No |
Substation input | No |
Creep-under protection | No |
Operation mode switch | No |
Animal zone | No |
Staircase light controller | Yes |
Response value luminosity adjustable | Yes |
Teach-function for response value luminosity | No |
Switch-off delay self-learning | No |
Optimum mounting height | 2.5 m |
Max. reach sideways | 6 m |
Max. reach frontally | 8 m |
Diameter reach on floor | 6 m |
Detection angle horizontal | 140-140 ° |
Switching power | 0 W |
Min. switch-on time | 15 s |
Max. duty cycle | 15 min |
Min. depth of built-in installation box | 0 mm |