Apparatus box AUS15.2, flush-mounted, for wall plates, HF
MOUNTING BOX AUS15.2P
ABB
With registration you can access the Würth Elektro online shop selection.
AUS15.2 apparatus boxes are used as retrofitting boxes in plate walls. Installation hole diameter 70 mm (cylinder saw AT1). Open a pipe or cable knock-out into the box and insert the box in the hole. Twist the screws clockwise to lift the attachment tab against the plate, fastening the box. Pipes or cables are locked with the box rig stubs, pushed from within. The box base has four base knock-outs: two for pipe knock-outs and two for AS12 cable clamp knock-outs. Box also usable in log walls. Made of halogen-free materials (IEC/61249-2-21).
Datasheets(X)
Shape | Round |
Construction type | Device connection box (round/square) |
Model | Single |
Provided with revolving ring | No |
Couplable | Yes |
Equipped with | None |
Diameter | 71 mm |
Depth | 43-43 mm |
Inner depth | 41 mm |
Suitable for wall/board thickness | 12-24 mm |
For number of electric fittings | 1 |
Mounting switching equipment | Screwing |
With screws | Yes |
Housing feed-through by break-out opening | Yes |
Housing feed-through by seal membrane | No |
Housing feed-through by nozzle | No |
Housing feed-through by step membrane | No |
For tube diameter | 20 mm |
Suitable for cable diameter | 8-13 mm |
Pipe locking | No |
Pipe locking optional | No |
Inlet from the rear | Yes |
Number of inlets | 0 |
Number of included spouts | 0 |
Material | Plastic |
Halogen free | Yes |
Surface protection | Untreated |
Colour | White |
Degree of protection (IP) | Other |
Transparent cover | No |
Sealable | No |
Circuit integrity | None |
With screening | No |
Air tight | No |
Max. conductor cross section | 0 mm² |
Number of poles of the clamp | 0 |
Clamp position fixed | No |
Luminaire hook mounting | No |
Nozzle | None |
With nail lugs | No |
Special application | None |
E-number Finland | 1152384 |
Brand | ABB |