Rivet nut
Rivet nut, round, reduced head, open, steel, galvanised
NITMUTTER FZB RUND LITENSK M4X10,4
With registration you can access the Würth Elektro online shop selection.
Simple and ideal when the place of use is
a thin material where threads are needed.
Round:
The most common when working on a steel sheet,
with normal loads.
Reduced head:
Used in a sheet when what is needed is a
joint level with the surface. Separate
countersinking is not needed.
Open model:
An effective and strong piercing nut thread without special requirements on the tightness of the joint
Datasheets(X)
 | |
Thread type x nominal diameter | M4 |
Length | 10.4 mm |
Min./max. grip range | 0.50-2.00 mm |
Head diameter | 6.7 mm |
Drill hole diameter | 6.4 mm |
Assembly force | 3400 N |
Tension force | 7200 N |
Max. tightening torque | 1.5 Nm |
Design | Open |
Material | Steel |
Surface | Zinc plated |
Last viewed
Flangeless Sonic-Sert
Antenna amplifier Johansson
Step light automatic ELPA
Compression lug PKD Ouneva
Surface-mounted frame for a double outlet 25/100 for double socket, 25/100 mm, Jussi
Set screw, hex socket
Office luminaire IP20 Linear IndiviLED Direct (Everloop)
Disconnect/test terminal block 2007 series TOPJOB® S
Terminal block enclosure IP66 Universal Enclosures
