Rivet nut
Rivet nut, round, flange head, closed, steel, galvanised
NITMUTTER FZB RUND STORSK. BLIND M4X16,5
With registration you can access the Würth Elektro online shop selection.
Simple and ideal when the place of use is
a thin material where threads are needed.
Round:
The most common when working on a steel sheet,
with normal loads.
Flange head:
Most commonly used when the head does not have to conform to the surface
Closed model:
Provides liquid-tight fastening and protects
against dirt and corrosion, important when the product
is painted and the threads are not protected
Datasheets(X)
 | |
Thread type x nominal diameter (D) | M4 |
Length (L) | 16.5 mm |
Min./max. grip range (E) | 0.30-2.50 mm |
Head diameter (d2) | 9 mm |
Head height (K) | 1 mm |
Drill hole diameter | 6 mm |
Tension force | 7300 N |
Max. tightening torque | 4 Nm |
Design | Closed |
Material | Steel |
Surface | Zinc plated |
Last viewed
Meter base Pikku-Waltteri Ensto
Contactor AF16
Through standoff WESO, unthreaded
Terminal block 2202 series with push-button 2 conductor TOPJOB® S
Office luminaire Linear IndiviLED Direct/Indirect
Cover plate 85 mm Valena Life
Motor protection switch MS116
Hexagonal bolt, full thread
LED strip profile cap LS
Earthing connector Instal