Wall anchor, nylon
Plastic anchor for light loads (secondary attachments)
NYLON WALL PLUG 5X25
With registration you can access the Würth Elektro online shop selection.
- High quality polyamide (nylon)
- Halogen silicone free
- Temperature resistance -40 °C…+80 °C
- The hammer-in stop prevents premature expansion during push-through installation
- The twist lock prevents turning in the drill hole
- Wall plug shaft with no expansion pressure prevents damage to plaster and tiles
- Push-through and cotter-pin installation
- For mounting, we recommend the ASSY-D plug screw
- Drill perforated brick using the rotary drill (without striking tool)
- The drill cuttings must be removed from the drill hole
- Screw length = attachment thickness (+plaster/insulation thickness) + anchor length + screw diameter
Can be stored in the ORSY® system
Datasheets(X)
Anchor diameter | 5 mm |
Material | PA - Polyamide |
Anchor length (l) | 25 mm |
Nominal drill-bit diameter (d 0) | 5 mm |
Embedding depth (h nom) | 25 mm |
Drill hole depth (t) | 35 mm |
Edge clearance (a r) | 25 mm |
Embedding depth (h s) | 25 mm |
Required wood screw diameter (d scr.wood) | 2.5 - 4 mm |
Required particle-board screw diameter (d scr.particle) | 4.5 mm |
Required screw length (l s) | Thickness of the add-on part (+ plaster/insulation thickness) + anchor length + screw diameter |
Max. attachment height (d a) - condition | Dependent on screw length |
Centre-to-centre distance (a) | 50 mm |
