Wall anchor, nylon
Plastic anchor for light loads (secondary attachments)
NYLON WALL PLUGS M10x50
With registration you can access the Würth Elektro online shop selection.
- High quality polyamide (nylon)
- Halogen silicone free
- Temperature resistance -40 °C…+80 °C
- The hammer-in stop prevents premature expansion during push-through installation
- The twist lock prevents turning in the drill hole
- Wall plug shaft with no expansion pressure prevents damage to plaster and tiles
- Push-through and cotter-pin installation
- For mounting, we recommend the ASSY-D plug screw
- Drill perforated brick using the rotary drill (without striking tool)
- The drill cuttings must be removed from the drill hole
- Screw length = attachment thickness (+plaster/insulation thickness) + anchor length + screw diameter
Can be stored in the ORSY® system
Datasheets(X)
Anchor diameter | 10 mm |
Material | PA - Polyamide |
Anchor length (l) | 50 mm |
Nominal drill-bit diameter (d 0) | 10 mm |
Embedding depth (h nom) | 50 mm |
Drill hole depth (t) | 65 mm |
Edge clearance (a r) | 50 mm |
Required wood screw diameter (d scr.wood) | 6 - 8 mm |
Embedding depth (h s) | 50 mm |
Required particle-board screw diameter (d scr.particle) | 8 mm |
Min. required screw diameter | 6 mm |
Max. required screw diameter | 8 mm |
Required screw length (l s) | Thickness of the add-on part (+ plaster/insulation thickness) + anchor length + screw diameter |
Max. attachment height (d a) - condition | Dependent on screw length |
Centre-to-centre distance (a) | 100 mm |
Last viewed
Lever up/down, Impressivo
Hexagonal bolt, full thread
Combination thermostat EB-THERM 205
Terminal block 2206 series with push-button 2 conductor TOPJOB® S
Installation cable MMJ
End component P Instal
Flush-mounted outlet with cover plate IP21 ELKO RS Nordic
CABLE GLAND PERFECT PERFECT, metric thread
Industrial outlet IP67, TP electric
Instrumentation cable NOVAK halogen-free