Drilling screw pan head DIN 7504-N
Drilling screw, pan head, DIN 7504-N, PH, steel, zinc plated
PIAS DIN 7504-N ZP 4,2X16
With registration you can access the Würth Elektro online shop selection.
- For fixing to aluminium and steel substrates in applications without approval.
- For aesthetically pleasing visible connections without an additional insulating floor plate.
- Zinc-plated drilling screws may only be used in places where no moisture is expected.
- Building permits and their regulations must be followed when using building permit compliant fastening elements.
With drill tip, mounting time reduced by at least 50%:
- Drilling without centring device
- threading
- fixing
All in one work phase.
Datasheets(X)
| 2749621.jpg"/> | |
Nominal diameter | 4.2 mm |
Length | 16 mm |
Type description | 4,2X16 |
Material | Steel |
Surface | Zinc plated |
Min. material thickness for steel | 1.75 mm |
Max. material thickness for steel | 3 mm |
Min./max. material thickness for steel | 1.75-3 mm |
Work length | 10 mm |
Internal drive | H2 |
Product weight (per item) | 1.570 g |
Drive type | Crosshead |
Last viewed
Surface-mounted luminaire IP44 Surface Circular 350
Through sleeve AJI
Bracket WMT CL1 HDG Hot dip zinc-plated, Meka
Switchgear panel Data flush/surface IP20 Delta
Silicone wire SIF
Contactor CTX3 22
Centre plate 2xKeystone angled ELKO RS Nordic
Mounting plate RDP-O zinc plated, Meka
Intermediate cover 115mm ELKO RS16
Wall luminaire