Drilling screw pan head DIN 7504-N
Drilling screw, pan head, DIN 7504-N, PH, steel, zinc plated
PIAS DIN 7504-N ZP 4,8X16
With registration you can access the Würth Elektro online shop selection.
- For fixing to aluminium and steel substrates in applications without approval.
- For aesthetically pleasing visible connections without an additional insulating floor plate.
- Zinc-plated drilling screws may only be used in places where no moisture is expected.
- Building permits and their regulations must be followed when using building permit compliant fastening elements.
With drill tip, mounting time reduced by at least 50%:
- Drilling without centring device
- threading
- fixing
All in one work phase.
Datasheets(X)
| 2749621.jpg"/> | |
Nominal diameter | 4.8 mm |
Length | 16 mm |
Type description | 4,8X16 |
Material | Steel |
Surface | Zinc plated |
Min. material thickness for steel | 1.75 mm |
Max. material thickness for steel | 4 mm |
Min./max. material thickness for steel | 1.75-4 mm |
Work length | 6 mm |
Internal drive | H2 |
Product weight (per item) | 2.250 g |
Drive type | Crosshead |
Last viewed
Hexagon socket screw, cylinder head
Hexagon socket screw, flat cylinder head, centre hole
Motor protection switch MS116
Strip connector PRO 10mm IP20
Blind rivet domed head open
HF cable channel with cut-off groove Legrand
Hexagon socket screw, flat cylinder head
Hexagon socket screw, cylinder head
Hexagon socket screw, cylinder head
Terminal block 2002 series 2-conductor GNYE TOPJOB® S