Drilling screw pan head DIN 7504-N
Drilling screw, pan head, DIN 7504-N, PH, steel, zinc plated
PIAS DIN 7504-N ZP 4,8X25
With registration you can access the Würth Elektro online shop selection.
- For fixing to aluminium and steel substrates in applications without approval.
- For aesthetically pleasing visible connections without an additional insulating floor plate.
- Zinc-plated drilling screws may only be used in places where no moisture is expected.
- Building permits and their regulations must be followed when using building permit compliant fastening elements.
With drill tip, mounting time reduced by at least 50%:
- Drilling without centring device
- threading
- fixing
All in one work phase.
Datasheets(X)
| 2749621.jpg"/> | |
Nominal diameter | 4.8 mm |
Length | 25 mm |
Type description | 4,8X25 |
Material | Steel |
Surface | Zinc plated |
Min. material thickness for steel | 1.75 mm |
Max. material thickness for steel | 4 mm |
Min./max. material thickness for steel | 1.75-4 mm |
Work length | 15 mm |
Internal drive | H2 |
Product weight (per item) | 3.150 g |
Drive type | Crosshead |
Last viewed
Wing repair washer
Defrosting cable Frostvakt 25
Auxiliary contactor MPCB MPX3 front installation
Motor protection switch MS116
Enclosed industrial luminaire Damp Proof Slim Value, IP65
Concrete curing cable BHS
Flange bolt, hexagon head, lock toothing
Thermal relay RTX3 100
Box cover AK20.1
Adjustable corner component ALC3, Unipro