Motion detector, flush IP21 PIR 120 Exxact
PIR 120 2300VA IP21 SE MET
SCHNEIDER ELECTRIC
With registration you can access the Würth Elektro online shop selection.
- Two versions of motion detector Basic are available. 350 W for resistive loads, R (neutral wire not necessary).
- 2,300 W for resistive, capacitive and inductive loads, RCL, (neutral wire necessary). Simultaneous conduction of different loads is possible.
- Detection angle 120°.
- Adjustable timer and light level.
- Recommended installation height 1.0–1.5 m.
Datasheets(X)
Model | Movement sensor |
Sensor type | Passive infrared |
With DALI interface | No |
Constant light control | No |
HVAC-control | No |
Animal zone | No |
Creep-under protection | No |
Networkable | Yes |
Scan angle | 120 ° |
Optimum mounting height | 1.2 m |
Staircase light controller | No |
Max. reach sideways | 10.5 m |
Max. presence range | 30 m² |
Suitable for wireless transmission | No |
Remote operation | No |
With remote control | No |
Response value luminosity adjustable | Yes |
With signal unit | No |
Teach-function for response value luminosity | No |
Suitable for ceiling mounting | No |
Suitable for wall mounting | Yes |
Dim function with dimmer basic element | No |
Connection type | Push-in clamp |
Material | Plastic |
Material quality | Thermoplastic |
Anti-bacterial treatment | No |
Colour | Other |
Transparent | No |
Degree of protection (IP) | IP20 |
Voltage type | AC |
Frequency | 50-60 Hz |
Nominal voltage | 230 V |
Min. switch-on time | 1 s |
Max. duty cycle | 20 min |
Detection angle horizontal | 0-180 ° |
Response value luminosity | 0-500 lx |
Max. switching power | 2300 W |
Suitable for C-load | Yes |
With alarm function | No |
Width | 71 mm |
Height | 71 mm |
Depth | 36 mm |
Diameter | 0 mm |
Built-in depth | 16 mm |
Built-in diameter | 0 mm |
Min. depth of built-in installation box | 60 mm |
E-number Finland | 2622243 |
Brand | SCHNEIDER ELECTRIC |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!