Pluggable interface relay CR-P series
PLUG-IN RELAY UC230VAC 2C/O 8A
ABB
With registration you can access the Würth Elektro online shop selection.
The CR-P series interface relays are used for electrical isolation, amplification and signal switching between an electronic control device (such as a PLC, iPC or fieldbus systems) and the sensor/actuator level. The CR-P product line offers the highest level of power switching in relay enclosures with an IP67 rating. In addition, nine different coil voltages are available for worldwide use, as well as gold-plated contacts, which are very important when connecting sensitive signals.
Datasheets(X)
Type of electric connection | Plug-in connection |
With detachable clamps | No |
Nominal current | 8 A |
Rated control supply voltage AC 50 Hz | 230-230 V |
Rated control supply voltage AC 60 Hz | 230-230 V |
Voltage type for actuating | AC |
Drive, polarization | Polarized |
Drive, switching attitude | Mono stable |
Number of contacts as normally closed contact | 0 |
Number of contacts as normally open contact | 0 |
Number of contacts as change-over contact | 2 |
With forced-guided contacts | No |
Type of switch contact | Single contact |
Complete with socket | No |
With LED indication | No |
Degree of protection (IP) | IP67 |
Width | 12.7 mm |
Height | 15.7 mm |
Depth | 29 mm |
E-number Finland | 2712753 |
Brand | ABB |
Last viewed
EMC CABLE GLAND MS WITH EARTH CLAMPS EMC, brass nickel plated
Rotary dimmer UNI200LED 5-200 W, flush Exxact
Heat shrink sleeve/tubing, thin-wall ATUM
Hexagon socket screw, flat round head
Through collar Instal
Flange nut, locking teeth
Set screw, hex socket
Slotted screw pan head DIN 7985
Hexagon socket screw, flat round head
REDUCER BR M SORMAT