Pluggable interface relay CR-U series
PLUG-IN RELAY UC24VDC 3C/O 10A
ABB
With registration you can access the Würth Elektro online shop selection.
The CR-U series interface relays are used for electrical isolation, amplification and signal switching between an electronic control device (such as a PLC, iPC or fieldbus systems) and the sensor/actuator level.
CR-U products have up to three contacts in one relay and a test button, which makes checking the circuit faster and easier. 12 coil voltages are available for worldwide use.
Datasheets(X)
Type of electric connection | Plug-in connection |
With detachable clamps | No |
Nominal current | 10 A |
Rated control supply voltage DC | 24-24 V |
Voltage type for actuating | DC |
Drive, polarization | Polarized |
Drive, switching attitude | Mono stable |
Number of contacts as normally closed contact | 0 |
Number of contacts as normally open contact | 0 |
Number of contacts as change-over contact | 3 |
With forced-guided contacts | No |
Type of switch contact | Single contact |
Complete with socket | No |
With LED indication | Yes |
Degree of protection (IP) | IP40 |
Width | 35 mm |
Height | 54.4 mm |
Depth | 35 mm |
Last viewed
Flush-mounted switch 10AX – 250V IP20 Valena Life
Hexagon socket screw, cylinder head
Netatmo motion detector
Residual current device outlet, flush IP44, Kosti
Flush button, releasable Compact
Circuit breaker Acti 9 iC60N
Coupling sleeve straight OBO
Floodlight Floodlight PFM, IP65
Floodlight IP 65 Floodlight Compact
Plastofast, pan head