Pluggable interface relay CR-U series
PLUG RELAY UC220VDC 3C/O10A CR-U220DC3L
ABB
With registration you can access the Würth Elektro online shop selection.
The CR-U series interface relays are used for electrical isolation, amplification and signal switching between an electronic control device (such as a PLC, iPC or fieldbus systems) and the sensor/actuator level.
CR-U products have up to three contacts in one relay and a test button, which makes checking the circuit faster and easier. 12 coil voltages are available for worldwide use.
Datasheets(X)
Type of electric connection | Plug-in connection |
With detachable clamps | No |
Nominal current | 10 A |
Rated control supply voltage DC | 220-220 V |
Voltage type for actuating | DC |
Drive, polarization | Polarized |
Drive, switching attitude | Mono stable |
Number of contacts as normally closed contact | 0 |
Number of contacts as normally open contact | 0 |
Number of contacts as change-over contact | 3 |
With forced-guided contacts | No |
Type of switch contact | Single contact |
Complete with socket | No |
With LED indication | Yes |
Degree of protection (IP) | IP40 |
Width | 35 mm |
Height | 54.4 mm |
Depth | 35 mm |
E-number Finland | 2712794 |
Brand | ABB |
Last viewed
Corner component Instal
Hexagon socket screw, cylinder head
Floodlight Floodlight PFM, IP65
Enclosed industrial luminaire Damp Proof Classic, IP65
Heat-shrink butt splice
Interconnector for mounting boxes ABB PMR490
End component for DLP-S cable channel
Office luminaire Linear IndiviLED Direct
Hexagon socket screw, cylinder head
Hexagon socket screw, cylinder head