Pluggable interface relay CR-U series
PLUGGABLE INTERF. RELAY UC110VAC 3C/O 10
ABB
With registration you can access the Würth Elektro online shop selection.
The CR-U series interface relays are used for electrical isolation, amplification and signal switching between an electronic control device (such as a PLC, iPC or fieldbus systems) and the sensor/actuator level.
CR-U products have up to three contacts in one relay and a test button, which makes checking the circuit faster and easier. 12 coil voltages are available for worldwide use.
Datasheets(X)
Type of electric connection | Plug-in connection |
With detachable clamps | No |
Nominal current | 10 A |
Rated control supply voltage AC 50 Hz | 110-110 V |
Rated control supply voltage AC 60 Hz | 110-110 V |
Voltage type for actuating | AC |
Drive, polarization | Polarized |
Drive, switching attitude | Mono stable |
Number of contacts as normally closed contact | 0 |
Number of contacts as normally open contact | 0 |
Number of contacts as change-over contact | 3 |
With forced-guided contacts | No |
Type of switch contact | Single contact |
Complete with socket | No |
With LED indication | No |
Degree of protection (IP) | IP40 |
Width | 35 mm |
Height | 54.4 mm |
Depth | 35 mm |
E-number Finland | 2712781 |
Brand | ABB |
Last viewed
Cover plate 85 mm Exxact-Artic
Defogger Adax Neo
Hexagon socket screw, flat round head
Installation conductor H05V2-K Twin cable
Illuminated releasable push button Compact
Illuminated selector switch Harmony
Auxiliary contact block TeSys
Slotted screw cylinder head DIN 84
Contactor CTX3 100
Enclosed switch-disconnector OTDCP16S22M