Pluggable interface relay CR-M series
PLUGGABLE INTERF. RELAY UC24VDC 4C/O 6A
ABB
With registration you can access the Würth Elektro online shop selection.
The CR-M series interface relays are used for electrical isolation, amplification and signal switching between an electronic control device (such as a PLC, iPC or fieldbus systems) and the sensor/actuator level.
Datasheets(X)
Type of electric connection | Plug-in connection |
With detachable clamps | No |
Nominal current | 6 A |
Rated control supply voltage DC | 24-24 V |
Voltage type for actuating | DC |
Drive, polarization | Polarized |
Drive, switching attitude | Mono stable |
Number of contacts as normally closed contact | 0 |
Number of contacts as normally open contact | 0 |
Number of contacts as change-over contact | 4 |
With forced-guided contacts | No |
Type of switch contact | Single contact |
Complete with socket | No |
With LED indication | No |
Degree of protection (IP) | IP40 |
Width | 21.2 mm |
Height | 35.6 mm |
Depth | 27.5 mm |
E-number Finland | 2712660 |
Brand | ABB |
