Pluggable interface relay CR-M series
PLUGGABLE INTERF.RELAY UC230VAC 2C/O 12A
ABB
With registration you can access the Würth Elektro online shop selection.
The CR-M series interface relays are used for electrical isolation, amplification and signal switching between an electronic control device (such as a PLC, iPC or fieldbus systems) and the sensor/actuator level.
Datasheets(X)
Type of electric connection | Plug-in connection |
With detachable clamps | No |
Nominal current | 12 A |
Rated control supply voltage AC 50 Hz | 230-230 V |
Rated control supply voltage AC 60 Hz | 230-230 V |
Voltage type for actuating | AC |
Drive, polarization | Polarized |
Drive, switching attitude | Mono stable |
Number of contacts as normally closed contact | 0 |
Number of contacts as normally open contact | 0 |
Number of contacts as change-over contact | 2 |
With forced-guided contacts | No |
Type of switch contact | Single contact |
Complete with socket | No |
With LED indication | No |
Degree of protection (IP) | IP40 |
Width | 21.2 mm |
Height | 35.6 mm |
Depth | 27.5 mm |
E-number Finland | 2712705 |
Brand | ABB |
Last viewed
Damp proof industrial luminaire Damp Proof Classic Emergency, IP65
Perimeter trunking screw fastening WDK
Surface-mounted luminaire IP65 Surface Bulk Head with EM motion detector
Hexagon socket screw, flat round head
Slotted screw pan head DIN 7985
Circuit breaker
Circuit breaker Acti 9 iC60N
Hexagon socket screw, cylinder head
Slotted screw pan head DIN 7985
Helawrap – split spiral binding