Occupancy sensor Thepiccola
PRESENCE INDICATOR THEPICCOLA 360DEG
THEBEN
With registration you can access the Würth Elektro online shop selection.
Passive infrared occupancy sensor for ceiling, round detection area 360°, max. Ø 8 m (50 m2); Automatic motion and light dependent lighting control; Blended light measuring suited for fluorescent lamps (FL/PL/ESL), halogen/incandescent lamps, and LED lamps; Lighting channel A: relay, 230 V; Fully or semi-automatic use; Adjustable light level switch-on value; “Teach-in” function; Impulse function for step light automatic; Adjustable Y-operation time; Test mode for testing operation and detection area; Connection with buttons possible for manual activation; Detection area expandable with parent/child device connection; Ready to use with factory settings; Ceiling aperture Ø 34–36 mm; Remote use possible with SendoPro, theSenda P and theSenda S remote controllers (sold separately).
Datasheets(X)
Model | Presence detector |
Sensor type | Passive infrared |
With DALI interface | No |
Constant light control | No |
HVAC-control | No |
Forced switch off | No |
Animal zone | No |
Creep-under protection | No |
Networkable | No |
Optimum mounting height | 2.5 m |
Staircase light controller | Yes |
Bridging switch | No |
Max. reach sideways | 4 m |
Max. reach frontally | 4 m |
Diameter reach on floor | 8 m |
Suitable for wireless transmission | No |
Remote operation | Yes |
With remote control | No |
Response value sensitivity adjustable | No |
Response value luminosity adjustable | Yes |
With signal unit | No |
Teach-function for response value luminosity | Yes |
Dim function with dimmer basic element | No |
Mounting method | Built-in |
Material | Plastic |
Material quality | Thermoplastic |
Halogen free | No |
Surface protection | Untreated |
Surface finishing | Glossy |
Colour | White |
RAL-number (similar) | 9010 |
Transparent | No |
Degree of protection (IP) | IP40 |
Voltage type | AC |
Frequency | 50-60 Hz |
Nominal voltage | 230 V |
Min. switch-on time | 30 s |
Max. duty cycle | 30 min |
Switch-off delay | 1800 s |
Detection angle horizontal | 0-360 ° |
Max. switching power | 2000 W |
Suitable for C-load | No |
Temperature | -20-50 °C |
Max. starting current | 10 A |
Substation input | Yes |
With alarm function | No |
Last viewed
Washer, flat, no chamfer
Perimeter trunking screw fastening WDK
Sauna light Saunaset FTLight
Circuit breaker
Cover plate 85 mm Exxact Basic
Tapping screw countersunk head DIN 7982-C
End plate 2002 series, TOPJOB®S
Surface-mounted frame high IP44 35/85 Exxact
Hexagon socket screw, cylinder head
Sealing ring AWS