Conduit bend JMKL HF 90 degrees
PROTECTIVE HOSE'S ARC JMKL20.3 20MM HF 9
ABB
With registration you can access the Würth Elektro online shop selection.
Pre-bent curve conduit extensions with a 90° angle and small radius are used alongside the conduit end piece AJ5.20, JMKL25.11, JMKL32.11 and bushing insulators AJ5.20, AJI13, AJI14, AJI15 as well as mounting and junction boxes, e.g. in spot casting and element production. Curve conduit extensions are equipped with a sleeve for continuing the conduit from the product’s long end.
Datasheets(X)
Material | Plastic |
Material quality | Other |
Surface protection | Untreated |
Quality of surface coating | Uncoated |
Surface polished | No |
Surface brushed | No |
Halogen free | Yes |
For nominal tube diameter | 20 mm |
Diameter | 20 mm |
With sleeve | Yes |
Two piece | No |
With inspection opening and cover | No |
Colour | Grey |
Flexible | No |
Bend angle | 90 ° |
Last viewed
Downlight Slim SQ, IP20
Circuit board support TRLCBS
Valena Life with Netatmo wireless switch + 1-part smart outlet
Thread-forming bushing WES
Wiring duct ECS
Threaded rod
Flush-mounted switch IP21 Exxact
Slotted screw countersunk head DIN 965
Coupling sleeve Aluminium pipe coupler
Contactor TeSys D