Push button with light, flush Exxact
E10 separate lamp circuit
PUSHBUTTON+LED, WT
SCHNEIDER ELECTRIC
With registration you can access the Würth Elektro online shop selection.
- 1 A parallel button with red lens. For IP20 c/c 60 mm installations with recessed device-mounting box or 35 mm surface device-mounting box.
- Lamp not included. Separate lamp circuit. If necessary, E10 cap lamp bought separately. The version with a lamp is: 2112401
- Centre plate fastened with concealed screws.
- Used with the “reserved” switch.
- 230V.
Datasheets(X)
Assembly arrangement | Basic element with central cover plate |
Model | Series push button |
Number of rockers | 1 |
Number of poles | 1 |
Nominal voltage | 250 V |
Rated current | 1 A |
With lighting | Yes |
With signal lamp | Yes |
Feedback-signal contact | No |
Type of fastening | Screw mounting |
Material | Plastic |
Material quality | Thermoplastic |
Halogen free | Yes |
Anti-bacterial treatment | No |
Surface protection | Untreated |
Surface finishing | Glossy |
Colour | White |
RAL-number (similar) | 9003 |
Transparent | No |
Label space/information surface | No |
Imprint | None |
Suitable for degree of protection (IP) | IP21 |
Device width | 71 mm |
Device height | 71 mm |
Device depth | 47 mm |
Min. depth of built-in installation box | 23 mm |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!