Residual current circuit breaker DX3 30mA
RCBO 2-P. C25A 30MA LEG
LEGRAND
With registration you can access the Würth Elektro online shop selection.
Residual current devices with overcurrent protection. Type A: detects AC and DC residual currents. Can be equipped with DX³ signal and remote control switches and motorised controls.
Datasheets(X)
Number of poles (total) | 2 |
Number of protected poles | 1 |
Rated voltage | 230 V |
Rated current | 25 A |
Rated fault current | 0.03 A |
Leakage current type | A |
Current limiting class | 3 |
Rated short-circuit breaking capacity according to EN 61009 | 6 kA |
Rated short-circuit breaking capacity according to IEC 60947-2 | 6 kA |
Rated short-circuit breaking capacity Icn according to EN 61009-1 | 6 kA |
Surge current capacity | 0.25 kA |
Voltage type | AC |
Frequency | 50 Hz |
Release characteristic | C |
Concurrently switching neutral conductor | Yes |
With interlocking device | Yes |
Pollution degree | 2 |
Width in number of modular spacings | 2 |
Built-in depth | 44 mm |
Anti-nuisance tripping version | No |
Degree of protection (IP) | IP20 |
Connectable conductor cross section solid-core | 0.75-16 mm² |
Connectable conductor cross section multi-wired | 0.75-10 mm² |
Brand | LEGRAND |
Last viewed
ENLARGER PA PG/PG Polyamide
Contactor relay NF40
Terminal block 2106 series with lever 3 conductor TOPJOB® S
Residual current device outlet, flush IP20 Exxact
Plastofast, pan head
Hexagon screw, countersunk head
Thread repair kit FILTEC MONOKIT
Reel TeSys
Cable-in conduit Aalto 20HF ML
Connector component for DLP-S cable channel