Residual current circuit breaker DX3 30mA
RCBO 4-P. C25A 30MA LEG
LEGRAND
With registration you can access the Würth Elektro online shop selection.
Residual current devices with overcurrent protection. Type A: detects AC and DC residual currents. Can be equipped with DX³ signal and remote control switches and motorised controls.
Datasheets(X)
Number of poles (total) | 4 |
Number of protected poles | 4 |
Rated voltage | 400 V |
Rated current | 25 A |
Rated fault current | 0.03 A |
Leakage current type | A |
Current limiting class | 1 |
Rated short-circuit breaking capacity according to EN 61009 | 6 kA |
Rated short-circuit breaking capacity according to IEC 60947-2 | 10 kA |
Rated short-circuit breaking capacity Icn according to EN 61009-1 | 6 kA |
Surge current capacity | 0.25 kA |
Voltage type | AC |
Frequency | 50 Hz |
Release characteristic | C |
Concurrently switching neutral conductor | Yes |
With interlocking device | Yes |
Pollution degree | 2 |
Width in number of modular spacings | 4 |
Built-in depth | 44 mm |
Anti-nuisance tripping version | No |
Degree of protection (IP) | IP20 |
Brand | LEGRAND |
Last viewed
Cable routing conduit aluminium, Instal
Taptite DIN 7500-M, countersunk head, thread rolling
End plate 2010 series
Cable spiral wrap white, halogen free
Motor protection switch MS116
Press-in screw WEFHS
Thread-forming bushing WESP4
Through standoff WESO
Circuit board support TRDLCBS
Strain relief device IP20 for surface box Exxact