Residual current device TX3
RCCB 2-P. 63A 30MA LEG
LEGRAND
With registration you can access the Würth Elektro online shop selection.
Residual current device IEC 61008-1 compliant, type A, fork or brush current track mounting
Datasheets(X)
Number of poles | 2 |
Rated voltage | 230 V |
Rated current | 63 A |
Rated fault current | 30 A |
Rated insulation voltage Ui | 250 V |
Rated impulse withstand voltage Uimp | 4 kV |
Mounting method | DIN rail |
Leakage current type | A |
Selective protection | No |
Short-time delayed tripping | No |
Short-circuit breaking capacity (Icw) | 10 kA |
Surge current capacity | 0.25 kA |
With interlocking device | Yes |
Frequency | 50 Hz |
Additional equipment possible | Yes |
Degree of protection (IP) | IP20 |
Width in number of modular spacings | 2 |
Built-in depth | 44 mm |
Ambient temperature during operating | -25-60 °C |
Pollution degree | 2 |
Connectable conductor cross section multi-wired | 0.75-35 mm² |
Connectable conductor cross section solid-core | 0.75-50 mm² |
Last viewed
Cable-in conduit Aalto 20HF ML
Washer for cylinder head screws
Working current tripping device MS
Taptite DIN 7500-M, countersunk head, thread rolling
Plastic enclosure TG PC
Bus module Digital output DC 24 V
Nylock nut, low profile, clamping piece (non-metal insert, ring)
Defrosting cable Ebeco Frostvakt 10
Cover plate 87 mm Exxact
Slotted screw countersunk head ISO 14581