Residual current circuit breaker with overcurrent DS202 30mA
RCCB 2-POL C 30mA DS202C-C25A30
ABB
With registration you can access the Würth Elektro online shop selection.
RCBO circuit breakers are commonly used in applications where both overcurrent protection (overload and short-circuits) and short-circuit protection must be combined. The circuit breakers detect these types of faults and breaks the circuit in the event of a fault, thereby ensuring the protection of both personnel and connected devices.
Properties
- AC-, A- ja AP-R-types available
- Wide breaking capacity range from domestic to industrial applications
- Max. rated current 125 A. Suitable in single or three phase grids.
- Sensitivity of 1000 mA at most
Datasheets(X)
Number of poles (total) | 2 |
Number of protected poles | 2 |
Rated voltage | 240 V |
Rated insulation voltage Ui | 500 V |
Rated impulse withstand voltage Uimp | 4 kV |
Rated fault current | 0.03 A |
Leakage current type | A |
Current limiting class | 3 |
Rated short-circuit breaking capacity according to EN 61009 | 6 kA |
Rated short-circuit breaking capacity according to IEC 60947-2 | 10 kA |
Rated short-circuit breaking capacity Icn according to EN 61009-1 | 6 kA |
Disconnection characteristic | Undelayed |
Voltage type | AC |
Frequency | 50/60 Hz |
Release characteristic | C |
Concurrently switching neutral conductor | Yes |
With interlocking device | Yes |
Pollution degree | 2 |
Ambient temperature during operating | -25-25 °C |
Width in number of modular spacings | 2 |
Built-in depth | 69 mm |
Flush-mounted installation | No |
Anti-nuisance tripping version | No |
Degree of protection (IP) | IP2X |
Connectable conductor cross section solid-core | 25-25 mm² |
Connectable conductor cross section multi-wired | 1-1 mm² |