Residual current device F200
RCCB 2-POLE 25A/30mA F202A
ABB
With registration you can access the Würth Elektro online shop selection.
ABB F 200 series residual current devices operate with both alternating and pulsating direct current (type A). They are aperiodic short-circuit proof up to 250 A. ABB residual current devices are overvoltage protected; they are not sensitive to momentary current spikes. Such may occur, e.g., when mounting linear fluorescent lamps, X-ray generators, IT systems, and thyristor regulators. Auxiliary/alarm connector use possible.
Datasheets(X)
Number of poles | 2 |
Rated voltage | 230 V |
Rated current | 25 A |
Rated fault current | 0.03 A |
Mounting method | DIN rail |
Leakage current type | A |
Selective protection | No |
Short-circuit breaking capacity (Icw) | 10 kA |
Surge current capacity | 6 kA |
Frequency | 50/60 Hz |
Additional equipment possible | Yes |
Degree of protection (IP) | IP2X |
Width in number of modular spacings | 2 |
Built-in depth | 69 mm |
E-number Finland | 3259225 |
Brand | ABB |
Last viewed
Ladder shelf KS20 hot dip galvanised, Meka
Surface mounting frame downlight Downlight Slim DN
Hexagonal bolt, full thread
Retaining ring
Slotted screw pan head DIN 7985
Connector component for DLP-S cable channel
Slotted screw countersunk head ISO 14581
Indicator light KA2
ceramic tubular fuse
Three-phase residual current device IP44, electric power