Residual current device FH200
RCCB 2-POLE 25A 30mA FH202A-25/0.03
ABB
With registration you can access the Würth Elektro online shop selection.
ABB F 200 series residual current devices operate with both alternating and pulsating direct current (type A). They are aperiodic short-circuit proof up to 250 A. ABB residual current devices are overvoltage protected; they are not sensitive to momentary current spikes. Such may occur, e.g., when mounting linear fluorescent lamps, X-ray generators, IT systems, and thyristor regulators. Auxiliary/alarm connector use not possible.
Datasheets(X)
Number of poles | 2 |
Rated voltage | 230 V |
Rated fault current | 0.03 A |
Rated insulation voltage Ui | 500 V |
Rated impulse withstand voltage Uimp | 4 kV |
Mounting method | DIN rail |
Leakage current type | A |
Short-circuit breaking capacity (Icw) | 1 kA |
Frequency | 50 Hz |
Additional equipment possible | No |
Degree of protection (IP) | IP20 |
Width in number of modular spacings | 2 |
Built-in depth | 69 mm |
Ambient temperature during operating | -25-55 °C |
Last viewed
Ceiling bracket TP2 acid-resisting steel, Meka
Cable routing conduit T-piece LKM
Surface-mounted frame 40/100 Impressivo
Downlight FTLight Luce square surface, IP44
Spiral binding, cable protector, standard
Lock washer, type B
Downlight IP54 Plano Basic
Cable tie mini blind natural TRLWSBH
Dimmer switch NOCTURNE
Residual current device outlet, flush IP20, Jussi