Residual current device FH200
RCCB 2-POLE 40A 30mA FH202A-40/0.03
ABB
With registration you can access the Würth Elektro online shop selection.
ABB F 200 series residual current devices operate with both alternating and pulsating direct current (type A). They are aperiodic short-circuit proof up to 250 A. ABB residual current devices are overvoltage protected; they are not sensitive to momentary current spikes. Such may occur, e.g., when mounting linear fluorescent lamps, X-ray generators, IT systems, and thyristor regulators. Auxiliary/alarm connector use not possible.
Datasheets(X)
Number of poles | 2 |
Rated voltage | 230 V |
Rated fault current | 0.03 A |
Rated insulation voltage Ui | 500 V |
Rated impulse withstand voltage Uimp | 4 kV |
Mounting method | DIN rail |
Leakage current type | A |
Short-circuit breaking capacity (Icw) | 1 kA |
Frequency | 50 Hz |
Additional equipment possible | No |
Degree of protection (IP) | IP20 |
Width in number of modular spacings | 2 |
Built-in depth | 69 mm |
Ambient temperature during operating | -25-55 °C |
E-number Finland | 3217626 |
Brand | ABB |
Last viewed
Wing repair washer, large outer diameter
Floodlight Floodlight PFM, IP65
Indicator light Compact
Pole mounting set Näpsä ZY34 FE
Rigid installation cable halogen free, MMJ XMJ
Flush-mounted switch 10AX/250V, IP44 Valena Life
Flush-mounted outlet with cover plate IP21 Exxact
Cover plate 87 mm with adapter Exxact
Signal cable LIYCY
Motor protection switch MS116