Residual current device F200
RCCB 4-POLE 25A/30mA F204A
ABB
With registration you can access the Würth Elektro online shop selection.
ABB F 200 series residual current devices operate with both alternating and pulsating direct current (type A). They are aperiodic short-circuit proof up to 250 A. ABB residual current devices are overvoltage protected; they are not sensitive to momentary current spikes. Such may occur, e.g., when mounting linear fluorescent lamps, X-ray generators, IT systems, and thyristor regulators. Auxiliary/alarm connector use possible.
Datasheets(X)
Number of poles | 4 |
Rated voltage | 400 V |
Rated current | 25 A |
Rated fault current | 0.03 A |
Mounting method | DIN rail |
Leakage current type | A |
Selective protection | No |
Short-circuit breaking capacity (Icw) | 10 kA |
Surge current capacity | 6 kA |
Frequency | 50/60 Hz |
Additional equipment possible | Yes |
Degree of protection (IP) | IP2X |
Width in number of modular spacings | 4 |
Built-in depth | 69 mm |
E-number Finland | 3259425 |
Brand | ABB |
Last viewed
Flange bolt, hexagon head, lock toothing
Hexagon socket screw, cylinder head
Charging station Terra
Emergency stop switch Osmoz, twist-to-release
Wall bracket VK hot dip galvanised, Meka
Spacer screw SIUL ZN
Plastic cabinet Cubo S
Cable trunking, flat angle DLP-S
Keor UPS device 1-stage
Hexagon socket screw, cylinder head