Residual current device FH200
RCCB 4-POLE 40A/30mA FH204A
ABB
With registration you can access the Würth Elektro online shop selection.
ABB F 200 series residual current devices operate with both alternating and pulsating direct current (type A). They are aperiodic short-circuit proof up to 250 A. ABB residual current devices are overvoltage protected; they are not sensitive to momentary current spikes. Such may occur, e.g., when mounting linear fluorescent lamps, X-ray generators, IT systems, and thyristor regulators. Auxiliary/alarm connector use not possible.
Datasheets(X)
Number of poles | 4 |
Rated voltage | 230 V |
Rated current | 40 A |
Rated fault current | 0.03 A |
Mounting method | DIN rail |
Leakage current type | A |
Selective protection | No |
Short-circuit breaking capacity (Icw) | 6 kA |
Surge current capacity | 6 kA |
Frequency | 50/60 Hz |
Additional equipment possible | No |
Degree of protection (IP) | IP2X |
Width in number of modular spacings | 4 |
Built-in depth | 69 mm |
E-number Finland | 3260481 |
Brand | ABB |
Last viewed
Hexagon screw, full thread
Wire marker roll 0.75 to 4.0 mm2 Helagrip HGDC
CONDUCTOR TAG STRIP 4.0–6.0 MM2 Black letters on a yellow background
Colour marker plate Exxact Actassi
Signal cable FLEX-JZ
Surface-mounted skirting box 42/85 IP31 Jussi
Cable spiral wrap
Cover plate 85 mm for double outlet Jussi
Handle-type fuse Mersen
Rubber cable NSGAFÖU 1.8/3 kV