Charging station Solid
RECHARGING STATION SOLID 22kW 5M DKH
UTU
With registration you can access the Würth Elektro online shop selection.
The Solid charging station is equipped with a 32A/3-phase TYPE 2 (T2) connection, allowing up to a maximum of 22 kW charging power. The charger has a fixed, five-metre-long charging cable and built-in 6MA DC residual current device. The dynamic load balancing (DKH) and kWh meter guarantee the optimal charging process. In addition, the charging station utilizes solar energy for charging. The delivery also includes the necessary current transformers.
The Solid charging station can be installed scaled with Master-Slave technology. One Master (HUB) station can control up to three Slave (Satellite) stations in the same group. This requires the installation of a data transfer cable from the distribution panel to all stations. It is important to note that the Master-Slave functionality is not available when using PureSolar.
Datasheets(X)
Installation side connection model | 3-phase |
Number of charging units | 1 |
Max. power per charging point | 22 kW |
Nominal connection power | 22 kW |
Width | 250 mm |
Height | 400 mm |
Depth | 105 mm |
Mounting method | Wall mounting |
Number of vehicle connectors Type 1 | 0 |
Number of vehicle connectors Type 1 CCS | 0 |
Number of vehicle connectors Type 2 | 1 |
Number of vehicle connectors Type 2 CCS | 0 |
Number of socket outlets Type 2 | 0 |
Number of vehicle connectors GB AC | 0 |
Number of vehicle connectors GB DC | 0 |
Number of socket outlets GB | 0 |
Number of socket outlets Type 3 | 0 |
Number of vehicle connectors CHAdeMO | 0 |
Number of CEE socket outlets | 0 |
Number of household socket outlets | 0 |
Length of charging cable | 5 m |
Number of earth leakage circuit breakers type A | 0 |
Number of earth leakage circuit breakers type B | 0 |
Housing material | Plastic |
Degree of protection (IP) | IP54 |
Impact strength | IK08 |
E-number Finland | 3500417 |
Brand | UTU |