Compressed crimp cable lug
RING TONGUE 1,5-M3
With registration you can access the Würth Elektro online shop selection.
DIN cable lug. Uninsulated. DIN 46234 compliant.
Datasheets(X)
Bolt dimension (metric) | 3 |
Flange shape | Ring shape |
According to DIN | Yes |
Insulation | None |
Colour insulation | Other |
Nominal cross section | 1.5-1.5 mm² |
Reel/roll packaging | No |
Sleeve form | Short |
Suitable for stranded conductors | Yes |
Suitable for fine strand conductors | Yes |
Suitable for high temperatures (to 650 °C) | No |
Suitable for insulated varnish | No |
Suitable for round conductors | Yes |
Suitable for flat conductors | No |
Material | Copper |
Surface protection | Tinned |
Max. current (Imax) | 27 A |
Flange hole | M3 |
Min./max. wire cross section | 1.5-1.5 mm² |
Wire diameter (d1) | 1.6 mm |
Distance between sleeve end and centre of hole (l) | 11 mm |
Diameter of hole (d2) | 3.2 mm |
Sleeve length | 5 mm |
Width (b) | 6 mm |
Max. wire cross section | 1.5 mm² |
Min. wire cross section | 1.5 mm² |
Standards | DIN 46234 |
Product weight (per item) | 0.549 g |
DIN | 46234 |
Last viewed
Office luminaire Linear IndiviLED Direct
Nylock nut, low profile, clamping piece (non-metal insert, ring)
Lighting rail T-component TA3A, Unipro
Defrosting cable Frostvakt 25
Compression pipe cable lug KR Elpress
Hexagon screw, partial thread
Circuit breaker
Lighting rail cover CS3, Unipro
Terminal block selection L-Boxx
Electronic ballast