Compressed crimp cable lug T-series
RING TONGUE 25-M5 UL
With registration you can access the Würth Elektro online shop selection.
T-series DIN cable lug. UL/CSA-approved. The series complies with the following measurement standard: DIN 46234. Uninsulated.
Datasheets(X)
Bolt dimension (metric) | 5 |
Flange shape | Ring shape |
According to DIN | Yes |
Insulation | None |
Colour insulation | Other |
Nominal cross section | 25-25 mm² |
Reel/roll packaging | No |
Sleeve form | Short |
Flange hole | M5 |
Suitable for stranded conductors | Yes |
Suitable for fine strand conductors | Yes |
Suitable for high temperatures (to 650 °C) | No |
Suitable for insulated varnish | No |
Suitable for round conductors | Yes |
Suitable for flat conductors | No |
Material | Copper |
Surface protection | Tinned |
Min./max. wire cross section | 25-25 mm² |
Max. current (Imax) | 115 A |
Wire diameter (d1) | 7.5 mm |
Distance between sleeve end and centre of hole (l) | 25 mm |
Diameter of hole (d2) | 5.3 mm |
Surface | Tin plated |
Material | Copper |
Width (b) | 12 mm |
Max. wire cross section | 25 mm² |
Min. wire cross section | 25 mm² |
Standards | DIN 46234 |
Product weight (per item) | 7.510 g |
DIN | 46234 |
Last viewed
Circuit breaker
Hexagon screw, full thread
Wire marker roll 0.75 to 4.0 mm2 Helagrip HGDC
Terminal block 2202 series with push-button 2 conductor TOPJOB® S
Cable routing conduit aluminium, Instal
Wall bracket VK hot dip galvanised, Meka
Hexagon screw, partial thread, fine thread
Wall bracket VK hot dip galvanised, Meka
Hexagon nut
Through standoff WESO