Compressed crimp cable lug T-series
RING TONGUE 25-M6 UL
With registration you can access the Würth Elektro online shop selection.
T-series DIN cable lug. UL/CSA-approved. The series complies with the following measurement standard: DIN 46234. Uninsulated.
Datasheets(X)
Bolt dimension (metric) | 6 |
Flange shape | Ring shape |
According to DIN | Yes |
Insulation | None |
Colour insulation | Other |
Nominal cross section | 25-25 mm² |
Reel/roll packaging | No |
Sleeve form | Short |
Suitable for stranded conductors | Yes |
Suitable for fine strand conductors | Yes |
Suitable for high temperatures (to 650 °C) | No |
Suitable for insulated varnish | No |
Suitable for round conductors | Yes |
Suitable for flat conductors | No |
Material | Copper |
Surface protection | Tinned |
Max. current (Imax) | 115 A |
Flange hole | M6 |
Min./max. wire cross section | 25-25 mm² |
Wire diameter (d1) | 7.5 mm |
Distance between sleeve end and centre of hole (l) | 25 mm |
Surface | Tin plated |
Material | Copper |
Width (b) | 12 mm |
Max. wire cross section | 25 mm² |
Min. wire cross section | 25 mm² |
Standards | DIN 46234 |
Product weight (per item) | 6.950 g |
DIN | 46234 |
Last viewed
Office luminaire Linear IndiviLED Direct/Indirect Dali
Spring pin, threaded
Set screw, hex socket
Sound-proofing component Instal
Blind rivet domed head open
Low-voltage gutter SR acid-resisting steel, Meka
Safety screw, round head, star socket / TX, safety peg
EMC LOCKNUT MS PG EMC, brass nickel plated
Lighting rail T-component TA3A, Unipro
Floodlight Floodlight PFM, IP65