Rivet bush WEMI
RIVET BUSH WEMI ZP M3 0,9-1,0
With registration you can access the Würth Elektro online shop selection.
WEMI is an internally threaded rivet bush with a serrated collar.
When installing, the collar is riveted around the hole and
the serrations are pressed into the base material, ensuring a strong
and permanent fitting.
• Suitable for very thin and hard materials.
• Well suited for aluminium, light metal, magnesium, etc.
• Can be installed with hand tools or automatic machines.
• Suitable for both drilled and punched holes.
• Suitable for materials up to 5.1 mm thick.
• Also suitable for joining two sheets together.
• Wide range of use, M3 – M6
Datasheets(X)
 | |
Thread type x nominal diameter | M3 |
Min./max. grip range | 0.9-1 mm |
Min./max. drill hole diameter | 4.2-4.25 mm |
Height | 2.8 mm |
Last viewed
Surface-mounted frame for a double outlet 25/100 for double socket, 25/100 mm, Jussi
Circuit board support TRMDLSP1
Cable tie adhesive surface natural TRMWSEB
Contactor AF16
Power busbar Canalis KNA
Valena Allure with Netatmo group/turn button
Installation conductor H05V2-K MKJ 90
Hexagon socket screw, cylinder head
Circuit board support TRLCBS3
Hexagon socket screw, flat round head