Rivet nut
Rivet nut, round, countersunk head, grooved, open, A2 stainless steel
RIVETNUT A2 COUNTERS. ROUND KNUR M4X11
With registration you can access the Würth Elektro online shop selection.
Simple and ideal when the place of use is
a thin material where threads are needed.
Round grooved:
Gives better torque grip.
Suits well for thinner material thicknesses and plastics.
Countersunk head:
Used when
flush joint is needed.
Open model:
An effective and strong piercing nut thread without special requirements on the tightness of the joint
Datasheets(X)
 | |
Thread type x nominal diameter | M4 |
Length | 11 mm |
Min./max. grip range | 1.50-3.00 mm |
Head diameter | 9 mm |
Head type | Countersunk head |
Head height | 1.5 mm |
Drill hole diameter | 6.1 mm |
Outer diameter | 5.9 mm |
Assembly force | 4900 N |
Tension force | 9100 N |
Max. tightening torque | 6.4 Nm |
Design | Open |
Material | Stainless steel A2 |
Last viewed
Wall luminaire IP44, Dana FTLight
Heat shrink hose TF21
Screw connector 8mm Hide-a-lite
Blade fuse, ATO
Ceiling bracket TP2 acid-resisting steel, Meka
Power cable CU MCMK/EKKJ Tele-Fonika
Cover plate 85 mm Valena Life
Weld stud ISO 13918 PT
CABLE MARKER STRIP 0.5-1.5 MM2
Terminal block 2002 series 4 conductor TOPJOB® S