Rivet nut
Rivet nut, round, countersunk head, grooved, open, A2 stainless steel
RIVETNUT A2 COUNTERS. ROUND KNUR M6X16
With registration you can access the Würth Elektro online shop selection.
Simple and ideal when the place of use is
a thin material where threads are needed.
Round grooved:
Gives better torque grip.
Suits well for thinner material thicknesses and plastics.
Countersunk head:
Used when
flush joint is needed.
Open model:
An effective and strong piercing nut thread without special requirements on the tightness of the joint
Datasheets(X)
Thread type x nominal diameter | M6 |
Length | 16 mm |
Min./max. grip range | 1.50-4.00 mm |
Head diameter | 11.7 mm |
Head type | Countersunk head |
Head height | 1.6 mm |
Drill hole diameter | 9.1 mm |
Outer diameter | 8.9 mm |
Assembly force | 9000 N |
Tension force | 21600 N |
Max. tightening torque | 26.7 Nm |
Design | Open |
Material | Stainless steel A2 |