Rivet nut
Rivet nut, partial hexagon, small head, open, stainless steel A2
RIVETNUT A2 HALFHEX REDUCED HEAD M4X11
With registration you can access the Würth Elektro online shop selection.
Simple and ideal when the place of use is
a thin material where threads must be made.
Small head:
Used in a plate when what is needed is a
fastening level with the surface. Separate
countersinking is not needed.
Open model:
An effective and strong piercing nut thread without special requirements to do with the of the tightness of the fastening
Datasheets(X)
 | |
Thread type x nominal diameter | M4 |
Length | 11 mm |
Min./max. grip range | 0.50-2.50 mm |
Head diameter | 7 mm |
Head height | 0.5 mm |
Hole pattern wrench size | 6.1 mm |
Design | Open |
Assembly force | 2900 N |
Tension force | 7900 N |
Max. tightening torque | 4.6 Nm |
Material | Stainless steel A2 |
Surface | Plain |
Last viewed
Spacer screw SIUL MSNI
ENLARGER PA PG/PG Polyamide
Vehicle protecting tube PAER
Flush-mounted outlet IP44 Exxact
Wing repair washer
Slotted screw pan head DIN 7985
Snow melting mat Ebeco Snowmat
Circuit breaker
Terminal block 2000 series 3 conductor TOPJOB® S
Neutral bar N and PE bars with 16 mm2 pillar terminals, Ensto