Rivet nut
Rivet nut, partial hexagon, small head, open, stainless steel A2
RIVETNUT A2 HALFHEX REDUCED HEAD M5X12
With registration you can access the Würth Elektro online shop selection.
Simple and ideal when the place of use is
a thin material where threads must be made.
Small head:
Used in a plate when what is needed is a
fastening level with the surface. Separate
countersinking is not needed.
Open model:
An effective and strong piercing nut thread without special requirements to do with the of the tightness of the fastening
Datasheets(X)
 | |
Thread type x nominal diameter | M5 |
Length | 12 mm |
Min./max. grip range | 0.50-3.00 mm |
Head diameter | 8 mm |
Head height | 0.5 mm |
Hole pattern wrench size | 7.1 mm |
Design | Open |
Assembly force | 5000 N |
Tension force | 15800 N |
Max. tightening torque | 8.8 Nm |
Material | Stainless steel A2 |
Surface | Plain |
Last viewed
Extension frame EB-THERM
shunt release MPCB MPX3
Cable routing conduit aluminium, Instal
Circuit board support TRMDLSP3
Cable clamp KP
Alarm contactor with short-circuit alarm MS
Blade connector female insulated PA
Apparatus box Multifix KR00
Safety switch OTP
Surface mounting frame downlight Downlight Slim SQ