Rivet nut
Rivet nut, partial hexagon, small head, open, stainless steel A2
RIVETNUT A2 HALFHEX REDUCED HEAD M6X14
With registration you can access the Würth Elektro online shop selection.
Simple and ideal when the place of use is
a thin material where threads must be made.
Small head:
Used in a plate when what is needed is a
fastening level with the surface. Separate
countersinking is not needed.
Open model:
An effective and strong piercing nut thread without special requirements to do with the of the tightness of the fastening
Datasheets(X)
 | |
Thread type x nominal diameter | M6 |
Length | 14 mm |
Min./max. grip range | 0.50-3.00 mm |
Head diameter | 10 mm |
Head height | 0.6 mm |
Hole pattern wrench size | 9.1 mm |
Design | Open |
Assembly force | 7700 N |
Tension force | 21600 N |
Max. tightening torque | 15.5 Nm |
Material | Stainless steel A2 |
Surface | Plain |
Last viewed
Lighting rail T34F, Unipro
Downlight Downlight Slim, IP20
Electrical wire H07V2-K MULTINORM UL1015
Signal cable FLEX-JZ
Valena Life with Netatmo outlet
CABLE MARKER STRIP 1.5-2.5 MM2
CONDUCTOR TAG STRIP 0.5–1.5 MM2
Hook and loop cable tie, green
Cover plate 87 mm with adapter Exxact
Circuit board support TRMSPM