Rivet nut
Rivet nut, round, flange head, closed, A2 stainless steel
RIVETNUT A2 ROUND LARGEH. CLOSE M10X28,5
With registration you can access the Würth Elektro online shop selection.
Simple and ideal when the place of use is
a thin material where threads are needed.
Round:
The most common when working on a steel sheet,
with normal loads.
Flange head:
Most commonly used when the head does not have to conform to the surface
Closed model:
Provides liquid-tight fastening and protects
against dirt and corrosion, important when the product
is painted and the threads are not protected
Datasheets(X)
 | |
Thread type x nominal diameter | M10 |
Length | 28 mm |
Min./max. grip range | 0.80-3.50 mm |
Head diameter | 17 mm |
Head height | 1.5 mm |
Drill hole diameter | 13.1 mm |
Tension force | 43000 N |
Max. tightening torque | 13 Nm |
Design | Closed |
Material | Stainless steel A2 |
Last viewed
Spacer screw SIUL MSNI
Flush-mounted outlet with cover plate IP21 Exxact
Flush-mounted outlet with cover plate IP21 Exxact
RUBBER SEAL with oval hole
Circuit breaker Acti 9 iC60N
Auxiliary contactor TeSys GVAN11
Hexagon nut
Flange bolt, hexagon head, lock toothing
Spring lock washer DIN 127-B ST
Self-clinch standoff WESOS