Rivet nut
Rivet nut, round, flange head, threaded, open, A2 stainless steel
RIVETNUT A2 ROUND LARGEH.KNURL M10X21
With registration you can access the Würth Elektro online shop selection.
Simple and ideal when the place of use is
a thin material where threads are needed.
Round grooved:
Gives better torque grip.
Suits well for thinner material thicknesses and plastics.
Flange head:
Most commonly used when the head does not have to conform to the surface
Open model:
An effective and strong piercing nut thread without special requirements on the tightness of the joint
Datasheets(X)
 | |
Thread type x nominal diameter | M10 |
Length | 21 mm |
Min./max. grip range | 1.00-3.50 mm |
Head diameter | 17 mm |
Head height | 1.7 mm |
Drill hole diameter | 13 mm |
Tension force | 39800 N |
Max. tightening torque | 54 Nm |
Design | Open |
Material | Stainless steel A2 |
Last viewed
Cable gland T-VET PG
Surface-mounted skirting box for Exxact angled double outlets 47/85 Exxact
Charging station Ensto One
Deep beam lamp HQL LED HIGHBAY
WIRE MARKER BAG 1.5-4.0 MM2 Closed
Slotted screw pan head DIN 7985
N/PE terminals with brass busbar fully insulated
Changeover switch KU 463 4x63A 400V 22kW
Line protection switch Acti 9 C60H DC
Hexagon screw, full thread