Rivet nut
Rivet nut, round, flange head, threaded, open, A2 stainless steel
RIVETNUT A2 ROUND LARGEH.KNURL M10X24
With registration you can access the Würth Elektro online shop selection.
Simple and ideal when the place of use is
a thin material where threads are needed.
Round grooved:
Gives better torque grip.
Suits well for thinner material thicknesses and plastics.
Flange head:
Most commonly used when the head does not have to conform to the surface
Open model:
An effective and strong piercing nut thread without special requirements on the tightness of the joint
Datasheets(X)
 | |
Thread type x nominal diameter | M10 |
Length | 24 mm |
Min./max. grip range | 3.50-6.00 mm |
Head diameter | 17 mm |
Head height | 1.7 mm |
Drill hole diameter | 13 mm |
Tension force | 39800 N |
Max. tightening torque | 54 Nm |
Design | Open |
Material | Stainless steel A2 |
Last viewed
Motor protection switch MS132
3-phase conductor rail system MS
Motor protection switch MPX3 32H
Auxiliary contactor block CTXMINI
Energy meter kWh meter 32 A 1-phase
Hexagon nut
Drilling screw countersunk head DIN 7504-P
WÜPOFAST®, blue passivated Chipboard screw
Slotted screw cylinder head ISO 14579
Ring wire terminal insulated PVC